Table of Contents

New Gel-Capacitors

By Keiji Itou

How to create plasma battery based on gans gel & Clay

  1. Salvage the carbon stick from an old a battery.
  2. Make the GaNS-gel with GaNS, Sodium polyacrylate and a little clay. Paste the GaNS-gel on the carbon stick.
  3. Roll baking paper around it.
  4. Roll an aluminum foil around it.
  5. Insert all into a 18-Turn Nano Coated Coil covered with GaNS-gel
  6. Insert the assembly into a shrink tube and shrink it.
  7. Insert all into a 18-Turn Nano Coated Coil covered with GaNS gel
  8. Insert the assembly into a shrink tube and shrink it.

Infos on Sodium Polyacrylate

You can order it on ebay


Battery Capacitor

By M.Keshe Cancer Solution@1:07:00

  1. Take a nanocoated Cu wire; bend the ends without touching the wire.
  2. Brush a piece of absorbent paper with GaNS-CO2.
  3. Wrap the paper around the Cu wire.
  4. After the first round, add aluminum foil. Continue winding the 2 layers a few turns more.
  5. Take another nanocoated Cu wire and roll it up ( 9 or 18 turns) to make a coil; bend the ends without touching the wire.

The thread is the negative; the coil is the positive.