KSW 393, August 12, 2021 What is the difference between graphene and nano coating? According to wikipedia: Graphene is an allotrope (specific shape) of carbon consisting of a single layer of atoms arranged in a two-dimensional honeycomb lattice. Graphene conducts heat and electricity very efficiently along its plane. The material strongly absorbs light of all…
Plasma and Health “We do not cure any disease, we use plasma tools to modify the body’s plasma environment that allows the body to regain its balance. ” Mr. Keshe We are more than the body, we live simultaneously on several levels: The soul at the spiritual level It is located in the centre of our…
Use of GaNS As you can see, there are two parts of the content in a GaNS ja: the GaNS which is sedimented at the bottom of the container and the Liquid Plasma (LP) which is the clear liquid above the GaNS. For health applications, we only use the LP – never the GaNS itself.…
The production of the 4 basic GaNS GaNS-CO2 1. In a plastic container install a nano-coated copper plate (Cu-np) (B) 2. Install another Zinc electrode (A) 3. Install a wire with a green LED between the two plates; the (+) terminal of the LED is a little longer – it is connected to the Cu-np…
The basic installation for GaNS production Each GaNS production setup consists of the following components: A plate of a simple metal that decides which GaNS will be produced A nano plated copper plate (Cu-np) A nano plated copper wire that connects the two metal plates Distilled or demineralized water with salt in a concentration of…
Biopori Plasmatic By Go Go Go Green! ‘Lubang Biopori’ ( The Biopori Hole) is a hole with a diameter of ±10-30 cm and a depth of ±30-100cm. It is filled with organic waste which retains well water to give it out slowly during dry spells. At the same time it helps degrade organic waste into…
GaNS General description GaNS is a new state of matter; a molecule of a gas that appears in nano form in a solid state on a nano scale. GaNS is the abbreviation for Gas in a Nano Solid-state. GaNS production is not the result of chemical reactions; it is the result of the creation of…
Nano coating by fire Nano coating by fire is the fastest but also the most fragile technique, because the layers remain fragile. Using a very soft brush, you can test if the layer is strong enough – run a soft brush gently over the nano-layers to see if they hold and there are no black…
Nano coating, hot caustic The caustic solution is prepared by mixing the following substances: 4% NaOH (essential) 1% KOH (essential) 1% MgSO4 (optional) 1% Ca(OH)2 (optional) For nano coating we use NaOH (caustic soda) and KOH (caustic potash). Potassium contains an isotope (K40) that is slightly radioactive, which gives extra energy to the process. The…
Anti-nuke reactor By Céline Wang I don’t know if you found out, but two days ago it seems that it have been an accident at a nuclear power plant in Russia. Anyway at this moment on this Planet, there is no area without radiation. In this article I tell you how to make a reactor…